Ipv4 Filter - Bosch Autodome IP 4000 HD Software Manual

50 en | Network
10.8

IPv4 Filter

Use this setting to configure a filter that allows or blocks network traffic that matches a
specified address or protocol.
IP Address 1 / 2
Enter the IPv4 address that you want to allow or block
Mask 1 / 2
Enter the subnet mask for the appropriate IPv4 address.
2015.04 | .07 | Software Manual
AUTODOME IP 4000 HD / AUTODOME
IP 5000 HD / AUTODOME IP 5000 IR
Bosch Security Systems