Color - Bosch Autodome IP 4000 HD Software Manual

18 en | Camera
–
Note: When the camera is in an indoor room that often has smoke or has low-contrast and the
camera monitors an area facing the outdoors (such as large windows), Bosch recommends to
select mode Outdoor.
Mode ID
The name of the selected mode is displayed.
Copy mode to
Select the mode from the drop-down menu to which you wish to copy the active mode.
Restore mode defaults
Click Restore Mode Defaults to restore the factory default modes. Confirm you decision.
6.3

Color

Brightness (0...255)
Adjust the brightness with the slider from 0 to 255.
Contrast (0...255)
Adjust the contrast with the slider from 0 to 255.
Saturation (0...255)
Adjust the color saturation with the slider from 0 to 255.
White balance
Select the appropriate white balance mode from the drop-down list.
–
–
Note: This is the default mode for cameras with a current Scene Mode of Indoor.
–
–
–
Apply white balance
Click Hold to put ATW on hold and save the current color settings. The mode changes to
manual.
The table below identifies the options available in the field White balance and the additional
fields that appear depending on the options selected.
Basic auto
Standard auto
2015.04 | .07 |
Vibrant
Basic auto mode allows the camera to continually adjust for optimal color reproduction
using an average reflectance method. This is useful for indoor light sources and for
colored LED light illumination.
Standard auto mode allows the camera to continually adjust for optimal color
reproduction in an environment with natural light sources.
Sodium vapor auto mode allows the camera to continually adjust for optimal color
reproduction in an environment with sodium vapor light sources (street lighting).
Dominant color auto mode takes into account any dominant color in the image (for
example, the green of a football pitch or of a gaming table) and uses this information to
obtain a well balanced color reproduction.
In Manual mode the Red, Green, and Blue gain can be manually set to a desired position.
Option in field Additional
"White balance" Input field
RGB-
weighted
white
balance
RGB-
weighted
white
balance
Additional fields for
configuration
R-weight
G-weight
B-weight
R-weight
G-weight
B-weight
Software Manual
AUTODOME IP 4000 HD / AUTODOME
IP 5000 HD / AUTODOME IP 5000 IR
NOTES
The 3 "-weight" fields appear
only when the option in the field
"RGB-weighted white balance" is
On.
Bosch Security Systems