Changing Profiles - Bosch NWC-0495-20P Operating Instructions Manual

50 en | Configuration via the browser
mation regarding data transmission are displayed and continu-
ally updated above the previews.
1.
2.
NOTE!
i
Stream 2 is always transmitted for alarm connections and
automatic connections. Take this into account when assigning
the profile.
Preview for
Select which video data stream should be displayed in the pre-
views. You can deactivate the display of the video images if the
performance of the computer is affected too strongly by the
decoding of the data streams.
–
7.4.2

Changing profiles

You can change individual parameter values within a profile and
the name. You can switch between profiles by clicking the asso-
ciated tabs.
NOTE! The profiles are rather complex. They include a number
of parameters that interact with one another. Therefore it is
i
generally best to use the default profiles. The profiles should
only be changed if you are completely familiar with all the
configuration options.
V 2.5 | 2007.6
Click a tab to select the associated stream.
Select the desired setting from the list.
Check the box for the required data stream.
Operating Instructions
Dinion IP
Bosch Security Systems