Heat Sink - HP Pavilion 17 Maintenance And Service Manual

Remove the fan:
1. Turn the system board upside down.
2. Disconnect the fan cable from the system board, and then remove the piece of tape that secures the fan
to the heat sink (1).
3. Remove the 3 screws securing the fan to the unit (2) and lift the fan to remove it (3).
4. Lift the fan (4) to remove it.
Reverse this procedure to install the fan.

Heat sink

Description
For use only on computer models equipped with AMD processors and UMA graphics 19 W for use with HP
Pavilion 17 Notebook PC computer models
For use only on computer models equipped with AMD processors and discrete graphics 19 W for use
with HP Pavilion 17 Notebook PC computer models
Intel processors and discrete graphics KVR for use with HP Pavilion 15 Notebook PC computer models
for use with HP Pavilion 17 Notebook PC computer models
For use only on computer models equipped with AMD processors and UMA graphics 25 W for use with HP
Pavilion 15 Notebook PC computer models:
For use only on computer models equipped with AMD processors and UMA graphics 19 W for use with HP
Pavilion 17 Notebook PC computer models:
For use only on computer models with Intel processors discrete memory 19 W for use with HP Pavilion
17 Notebook PC computer models:
For use only on computer models with Intel processors discrete memory 19 W for use with HP Pavilion
15 Notebook PC computer models
For use only on computer models with Intel processors discrete memory 19 W for use with HP Pavilion
17 Notebook PC computer models
Spare part number
767339-001
767340-001
795096-001
764082-001
767339-001
767340-001
777250-001
762524-001
Component replacement procedures 85