HP Pavilion 17 Maintenance And Service Manual page 87

Table of Contents

Advertisement

3.
Remove the power connector cover by removing the screw(s) (1) and lifting the cover (2).
NOTE:
The power connector cover has two screws, however, the screw on the left is removed during
the base enclosure and top cover removal process.
NOTE:
You will remove the power connector after you have removed the system board. This
procedure is to remove the power connector cover if did not remove it when removing the display panel.
4.
Remove the six Phillips screws (1).
Component replacement procedures
77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pavilion 15

Table of Contents