Touchpad Button Board - HP Pavilion 17 Maintenance And Service Manual

TouchPad button board

Description
For HP Pavilion 15 Notebook PC Intel computer models
In Ano silver
In ash silver
For HP Pavilion 15 Notebook PC AMD computer models
In Ano silver
In ash silver
For HP Pavilion 17 Notebook PC Intel computer models
In ash silver
In natural silver
For HP Pavilion 17 Notebook PC AMD computer models
In Ano Silver
In Ash Silver
Before removing the TouchPad button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive.
6. Remove the top cover from the base enclosure (see
Remove the TouchPad button board:
1. Turn the top cover upside down, with the front toward you.
2. Remove the two broadhead screws (1) that secure the TouchPad button board bracket to the top cover.
NOTE:
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Some models may have three screws for the TouchPad button board (1).
42).
Base enclosure on page
Spare part number
762506-001
762525-001
781767-001
781768-001
765792-001
767059-001
781764-001
781765–001
46).