Fan - HP Pavilion 17 Maintenance And Service Manual

1. Release the metal clip to disconnect the power connector cable (1) from the system board.
2. Disengage the cable from the clips (2).
3. Release the clips (3), and then remove the power connector cable (4).
Reverse this procedure to install the power connector cable and bracket.

Fan

Description
For use with HP Pavilion 15 Notebook PC computer models
For use with HP Pavilion 17 Notebook PC computer models
Before removing the fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive.
6. Remove the top cover from the base enclosure (see
7. Remove the WLAN module (see
8. Remove the system board (see
84 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 42),
WLAN module on page
System board on page
Spare part number
762505-001
765788-001
Base enclosure on page 46).
62).
70).