Auto Attendant - Grandstream Networks UCM6102 Instruction Manual

UCM6102 IP PBX

Auto Attendant

To configure Auto Attendant navigate to PBX4Call Features4IVR and click on
Create New IVR. Enter a name next to Name and a valid extension number next to
Extension. Welcome Prompt may be left as is or manually created by clicking on
Prompt. A customized recording may be uploaded here. Below under Key Pressing
Events is where an extension can be matched to a specific digit. In this example digit
1 was mapped to extension 100. The rest of the fields may be configured according
to preference. When done click Save then Apply Changes from above.
V 1.4 14