Goal; Prerequisites; Grandstream Ucm6102 Configuration - Grandstream Networks UCM6102 Instruction Manual

Ip pbx

Hide thumbs Also See for UCM6102:

Table of Contents

UCM6102 IP PBX

Goal

The purpose of this configuration guide is to describe the steps needed to configure

the Grandstream UCM6102 IP-PBX for proper operation with Optimum Business

SIP Trunking.

Please follow the instructions in the Optimum Business SIP Trunk Set-up Guide. The

Set-up Guide was left by the Optimum Business technician at installation. If you do

not have the Set-up Guide, go to www.optimumbusiness.com/SIP to download

a copy.

This knowledge base solution provides the configuration steps for both PBX

registration and static or non-registration modes of PBX operation.

PBX Information

Manufacturer:

Model:

Software Version:

Does the PBX send SIP Registration messages (Yes/No)?

The steps below describe the basic configuration required to enable the

Grandstream UCM6102 IP-PBX to use Optimum Business SIP trunking for inbound

and outbound calling. Please refer to the Grandstream UCM6102 documentation for

other advanced PBX features.

The configuration described here assumes that the PBX is already configured

and operational with station side phones using assigned extensions or DIDs. This

configuration is based on Grandstream UCM6102 version 1.0.4.7.

V 1.4

Grandstream Networks

UCM6102

1.0.4.7

Yes

Table of Contents