Insufficient Paper For Job; This Paper Cannot Be Used - Canon iPF6400S Basic Manual

iPF6400S Basic Guide

Insufficient paper for job

The printer has received a print job longer than the amount of roll paper
left when ManageRemainRoll in the Control Panel menu is On.

This paper cannot be used.

Paper that is too large for the printer has been loaded.
Paper that is too small for the printer has been loaded.
Paper has been loaded that is too small to print the test
pattern for printhead adjustment or nozzle checking.
138
Cause
Cause
Cause
Printing will resume, starting from the
page on which the error occurred.
If this error recurs after you reload the
roll, remove the Roll Holder from the
printer, push the roll firmly in until it
touches the Roll Holder flange, and
reload the Roll Holder in the printer.
(See "Loading Rolls on the Roll Holder.")
➔P.12
Press ▲ or ▼ to select Print, and then press
the OK button to resume printing.
However, the roll paper may run out during the
print job and you may not be able to print all of
the document.
Press ▲ or ▼ to select Change Paper, and
then press the OK button.
Change the Paper Source of the printer driver,
or replace the roll with a roll that has enough
paper for the print job, and then print.
(See "Removing the Roll from the Printer.")➔
P.17
(See "Loading Rolls in the Printer.")➔P.14
Press ▲ or ▼ and select Stop Printing or
press the Stop button to stop printing.
Corrective Action
Press the OK button and load paper of the correct size.
(See "Paper Sizes.")➔User's Guide
Press the OK button and load paper of the correct size.
(See "Paper Sizes.")➔User's Guide
Press the OK button and load unused paper A4/Letter
(vertical) or larger. More than one sheet may be required
depending on the adjustment.
Corrective Action
Corrective Action