iPF6400S Basic Guide
Troubleshooting
Problems Regarding Paper
Clearing Jammed Roll Paper ....................................................................................................................... 102
Cannot load sheets ...................................................................................................................................... 109
Paper is not cut neatly .................................................................................................................................. 109
Paper is not cut ............................................................................................................................................ 109
Margins are wide .......................................................................................................................................... 110
Clearing Jammed Roll Paper
If paper from a roll becomes jammed, Paper jam is shown on the Display Screen of the Control Panel.
Remove the jammed paper as follows.
• For instructions on removing scraps from the paper feed slot after clearing jammed roll paper,
see "Clearing Jammed Paper (Paper Feed Slot)."➔P.107
Important
1
Open the Roll Feed Unit Cover. Use
commercially available scissors or the like to cut
the paper of the loaded roll.
Caution
Note
2
Press the OK button.
3
Remove the jammed paper.
102
• When cutting paper, be careful to avoid injury or damage to the printer.
• If it is difficult to perform operations from the front of the printer, perform operations from
the back of the printer.
If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it
easier to perform operations from the front of the printer. (See "Lowering the Up-down
Unit of the Spectrophotometer Unit (option) Manually.")➔P.19