Canon iPF6400S Basic Manual page 16

iPF6400S Basic Guide
Important
Note
5 Insert the edge of the roll in the Paper Feed Slot
(a) and advance the roll until you hear the feed
tone.
Important
6
Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll
setting and the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.")
➔User's Guide
ManageRemainRoll
Off
On
16
• Do not force the Roll Holder into the printer with the right and left ends reversed.
Otherwise, it may damage the printer or Roll Holder.
• If it is difficult to load rolls from the front of the printer, load rolls from the back of the
printer.
If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it
easier to perform operations from the front of the printer. (See "Lowering the Up-down
Unit of the Spectrophotometer Unit (option) Manually.")➔P.19
• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This
may affect the printing quality. We recommend wearing clean cloth gloves when
handling rolls to protect the printing surface.
• If the paper is wrinkled or warped, straighten it out before loading it.
• Load paper straight so it is not fed askew.
Barcodes
Printed A menu for selection of the type of paper is shown on the Display
Screen.
Not printed
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Printed The type and amount of paper left is automatically detected based on
the barcode printed on the roll.
There is no need to specify the type and length of the paper.
Not printed A menu for selection of the type and length of paper is shown on the
Display Screen.
Press ▲ or ▼ to select the type and length of paper loaded, and then
press the OK button.
Printer Operation After the Paper is Fed