Cleaning The Printer - Canon iPF6400S Basic Manual

Cleaning the Printer

Cleaning Inside the Top Cover ....................................................................................................................... 53
Cleaning the Printhead ................................................................................................................................... 55
Cleaning the Spectrophotometer Unit (option) Parts ...................................................................................... 56
Cleaning Inside the Top Cover
Clean inside the Top Cover about once a month to maintain better printing quality and help prevent
problems.
Also clean inside the Top Cover in the following situations to ensure optimal operation.
• If the printed surface or the underside of paper is dirty after printing
• After you have used up a roll
• After borderless printing
• After printing on small paper
• After printing on paper that generates a lot of cutting debris
• If you have replaced the roll
• After printing on paper that generates a lot of paper dust
• If the message Blue platen switch is dirty. is displayed
• If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper. We
recommend cleaning the Platen after borderless printing or printing on small paper.
Important
• If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is cut. We
recommend cleaning the Ejection Guide even if it does not appear dirty, because it may
actually be covered with paper dust.
1 On the Tab Selection screen of the Control
Panel, press ◀ or ▶ to select the Settings/Adj.
tab ( ).
• If the Tab Selection screen is not displayed, press the Menu button.
Note
2 Press the OK button.
The Set./Adj. Menu is displayed.
Press ▲ or ▼ to select Maintenance, and then press the OK button.
3
Press ▲ or ▼ to select Clean Platen, and then press the OK button.
4
A message on the Display Screen requests you to open the Top Cover.
iPF6400S Basic Guide
53