the notch of the eccentric shaft.
Attention
Initiate performance test.
The tension of the return spring must be acting
against the pressure onto the seting screw.
Speed control - Stationary
The outer torsion spring pulls the acceleration
lever from the stop-position back into idle-
position.
Speed control – Vehicle / Bowden cable
The outer torsion spring pulls the acceleration
lever into stop-position.
Speed control – Generator
The outer torsion spring pulls the acceleration
lever into full-speed-position.
Attention
The spring tension may be altered by hooking
the spring leg into one of the neighboured
notches !
10. Piston
Install the piston rings using a ring expander.
Imprinted sign has to be on top.
REASSEMBLY PROCEDURES
- 48 -