Farymann Diesel 15W Repair Manual page 23

5. High pressure fuel line :
Loosen the high pressure fuel line by holding a
14 mm wrench on the delivery valve while un-
screwing the fuel line fitting
Loosen the high pressure line at the injector in
the same way.
Caution
Check taper ends of the high pressure line for
damage or wear.
Replace if necessary.
6. Fuel injector :
Remove hex nuts and lock washer from injector
clamp. Pull out injector.
Caution
Sticking injector : Use a soft faced hammer and
tap slightly.
OR : Take an old high pressure line to pull the
injector out.
Check injector and cylinder head bore for the
copper washer ! Copper washer has to be rep-
placed in all cases !
RE-ASSEMBLING PROCEDURES
.
- 23 -