RE-ASSEMBLING PROCEDURES
Remove the key, belleville washers, angle ringe,
o-ring and thrust washer.
21. Crankshaft
Remove the crankshaft from the crankcase, be-
ing careful not to drag the crankshaft gear on the
main bearing bushing.
Use a puller to pull of the crankshaft gear.
In case the roller bearing needs replacement,
replace also the inner race, which is shrunk fit
on to the crankshaft.
Use race puller to pull off the inner race.
The engine is now completely stripped down.
Clean all parts with diesel fuel or other suit-
able cleaning agent.
Check parts for damaga, wear and tear.
Replace is necessary.
- 31 -