Memory Channel Number Change; Memory Channel Sort - Yaesu FTM-10R Operating Manual

M
You may change the memory channel number to a desired vacant memory channel manu-
ally.
1. Recall the memory channel on which you wish to change the Memory Channel number.
2. Press and hold the
3. Rotate the DIAL knob to select Menu Item "M2 MEM CH".
4. Press the key briefly. The current memory channel num-
ber will appear in the display.
5. Press and hold the
6. Rotate the DIAL knob to select the desired memory chan-
nel number.
If you decide to cancel the Memory Channel Number
Change, press the [ VOL/SEL ] key.
If the channel number is blinking, that channel is currently
"occupied" by other frequency data, and you should not
select that channel.
7. Press and hold the
8. Press the [ VOL/SEL ] key to save the new setting and return to the memory recall mode.
You may sort and renumber the Memory Channels by frequency, from low to high:
1. Press the front panel
2. Press and hold the
mode.
3. Rotate the DIAL knob to select Menu Item "M3 MEM
SORT".
4. Press the key briefly, to display the confirmation mes-
sage ("SORT Y") on the LCD.
If you decide to cancel the Memory Channel Sort, press the
[ VOL/SEL ] key.
5. Press and hold the
message ("SORTING") on the LCD, then the FTM-10R is
reset automatically and sorting is complete.
FTM-10R O
PERATING
C
EMORY HANNEL
key to enter the Memory Channel Customization mode.
key for one second.
key to change the Memory Channel Number.
M
EMORY
key to switch to the Memory Recall mode, if needed.
key for one second to enter the Memory Channel Customization
key for one second to display the
M
ANUAL
M
EMORY
N
UMBER
C S
HANNEL ORT
O
PERATION
C
HANGE
37