Rotax 125 MAX Installation Instructions And Operators Manual page 3

Foreword
Introduction
Chapter structure
Effectivity: 125 MAX/Junior MAX/Mini MAX/Micro MAX
Edition 1/Rev. 0
Introduction
All data and procedures are based on the state of knowledge at
the time of publication and the Manual has been drawn up to the
best of our knowledge, however, excluding any liability.
These instructions are only valid for engines and parts, which
were supplied by BRP-Powertrain. This Operators Manual con-
tains important information about safe operation of the engine, to-
gether with descriptions of the system and its layout, technical
data, operating media and the operational limits of the engine.
If any passages of the Manual are not clearly understood or if you
have questions, please contact an authorized Distributor or Ser-
vice Center for ROTAX-Kart engines.
Congratulations on choosing the ROTAX engine Type 125 MAX,
125 Junior MAX, 125 Mini MAX or 125 Micro MAX.
This ROTAX engine has been developed exclusively for use in
Go-Karts, which must only be run on specified tracks. This prod-
uct has many technical innovations that have been filed for patent.
In case of change of the ownership, hand over this Manual, the
Engine Identity Card and the product- and service registration
document to the new owner.
NOTE: Technical information contained in this docu-
ment may be different to the RMC technical reg-
ulations.
The Installation- and Operators Manual is subdivided into the fol-
lowing chapters:
Subject
Introduction
List of effective pages
Table of amendments
Installation instructions
Operators Manual
BRP-Powertrain
Chapter
Chapter INTRO
Chapter LEP)
Chapter TOA)
Chapter 1)
Chapter 2)
page INTRO-1
February 01/2014