Midi Setup - Yamaha QL5 Reference Manual

MIDI/GPI screen (MIDI SETUP page)
You can select the type of MIDI messages that will be transmitted and received, and choose
the port that will be used.
1
2
4
6
7
1
PORT/CH field
Enables you to select the port and MIDI channel that will be used to transmit and receive
MIDI messages.
• Tx PORT/Tx CH......... Press these buttons to open windows in which you can
respectively select a port and MIDI channel to transmit MIDI
messages.
• Rx PORT/Rx CH........ Press these buttons to open windows in which you can
respectively select a port and MIDI channel to receive MIDI
messages.
NOTE
When transmitting or receiving Parameter Changes, the channel number you specify here is used
as the device number (a number that identifies the transmitting or receiving unit).
2
PROGRAM CHANGE field
Enables you to switch MIDI Program Change message transmission and reception on or
off.
• Tx ............................... Switches program change transmission on/off.
• Rx............................... Switches program change reception on/off.
• ECHO......................... Switches on or off echo output of Program Change messages.
(If this function is on, Program Change messages received
from an external device will be retransmitted without
modification.)
3
PROGRAM CHANGE MODE field
Enables you to select the Program Change transmit/receive mode.
• SINGLE...................... If this button is on, Program Changes will be transmitted and
• MULTI ........................ If this button is on, program changes will be transmitted/
• OMNI.......................... If this button is on, Program Changes on all MIDI channels will
• BANK......................... If this button is on, Bank Select messages can be transmitted
3
4
CONTROL CHANGE field
Enables you to switch MIDI Control Change message transmission and reception on or
5
off.
• Tx............................... Switches control change transmission on/off.
• Rx .............................. Switches control change reception on/off.
• ECHO......................... Switches on or off echo output of Control Change messages.
5
CONTROL CHANGE MODE field
This field enables you to select the Control Change transmission/reception mode.
• NRPN button ............. If this button is on, the QL mix parameters will be transmitted/
• TABLE button ........... If this button is on, the QL mix parameters will be transmitted/
6
PARAMETER CHANGE field
Enables you to turn transmission/reception of SysEx (system exclusive) messages on or
off. (These are special messages used to control the parameter of the QL console.)
• Tx............................... Switches parameter change transmission on/off.
• Rx .............................. Switches parameter change reception on/off.
• ECHO......................... Switches on or off echo output of Parameter Change
7
OTHER COMMMAND field
Switches on or off echo output of other MIDI messages. (If this function is on, other
MIDI messages received from an external device will be retransmitted without
modification.)
162
received on a single MIDI channel (Single mode).
received on multiple MIDI channels (Multi mode).
be received in Single mode. Multi mode transmission/reception
and Single mode transmission are disabled.
and received in Single mode. (Bank Select messages switch
the group of Program Change messages to be used.)
(If this function is on, Control Change messages received from
an external device will be retransmitted without modification.)
received as NRPN messages on one MIDI channel (NRPN
mode).
received as Control Change messages on one MIDI channel
(TABLE mode).
messages. (If this function is on, Parameter Change messages
received from an external device will be retransmitted without
modification.)
MIDI
Reference Manual