Initializing The Parameters Of A Channel - Yamaha QL5 Reference Manual

Function CH JOB
Access Area menu
CH MOVE MODE window
1
1
SOURCE CH field
Displays the move-source channel. While this window is displayed, press a [SEL] key on
the top panel to select an input channel. The selected channel will be highlighted in this
field. If you want to re-select the move-source channel, press this field.
2
DESTINATION CH field
Displays the move-destination channel. When you specify the move-source, you can
then select the move-destination input channel by pressing its [SEL] key on the panel.
When the move-destination channel is selected, this field will be highlighted. If you
want to defeat the selected move-destination channel, press the DESTINATION CH field.
NOTE
In the case of the QL1, faders that do not exist on the model will not be shown.
3
MOVE button
Executes a move operation. After selecting the move-source channel and
move-destination channel, the channel settings move from the move-source to the
move-destination. The settings of all channels between the move-source and
move-destination will shift toward the move-source by one channel.
4
CLOSE button
Press this button to close the window and return to the previous screen.

Initializing the parameters of a channel

2
You can restore the parameters of a channel to an initialized state. This operation can be
performed on any channel(s).
3
STEP
1. In the Function Access Area, press the CH JOB button.
2. Press the DEFAULT button in the CH JOB menu.
4
3. Press the [SEL] key of the channel(s) to be initialized to make it light (multiple
selections are allowed).
4. Press the DEFAULT button to execute the Initialization.
76
Channel Job
Reference Manual