Talkback - Yamaha QL5 Reference Manual

MONITOR screen
In the MONITOR screen, the TALKBACK field enables you to check the current talkback
settings, and turn talkback on or off.
1 2
1
TALKBACK display buttons
When you press this button, the TALKBACK screen will appear, in which you can make
detailed talkback settings.
2
INPUT TO TALKBACK field
• INPUT TO TALKBACK patch button
........................ Press the button to open the PORT SELECT window, in
which you can patch a desired input port to talkback.
The selected port name will appear on the button.
• INPUT GAIN knob................. Sets the input gain of the selected port.
• Input level meter................... Indicates the level of signals after the input gain.
3
TALKBACK ASSIGN field
An indicator lights to indicate the currently-selected output destination of the talkback
signal.
4
TALKBACK ON button
Switches talkback on or off.
3 4
TALKBACK window
Press the TALKBACK popup display button or the ASSIGN field to open the TALKBACK popup
window. In this popup window you can make detailed settings for talkback.
1
1
INPUT TO TALKBACK field
This field allows a mic connected to a conventional input port to be used as a talkback
input.
• INPUT TO TALKBACK patch button
Press the button to open the PORT SELECT popup window, in which you can patch a
desired input port to talkback. The selected port name will appear on the button.
• +48V button
This is an on/off switch for the phantom power (+48V) supplied to the selected input
port.
• ANALOG GAIN knob
Adjusts the analog gain setting for the selected input port. If you press this knob, you
can use the [TOUCH AND TURN] knob to adjust the gain.
• HA meter
Indicates the input level of a mic connected to the selected input port.
• GC ON button
Turns the Gain Compensation (gain correction function) on or off. The button will
appear if the input jack of an I/O device is patched.
• Gain Compensation meter
Indicates the level after Gain Compensation. It will appear if the input jack of an I/O
device is patched.
NOTE
These parameters and meters will not appear if no input port is selected.
109
Talkback and Oscillator
2
3
Reference Manual