Hard Drive And Optical Drive Cables And Connectors - HP ProOne 400 G1 Maintenance & Service Manual

Hard drive and optical drive cables and connectors

Description
Optical drive cable
Hard drive cable
The hard drive and optical drive connectors are located near the middle of the computer. Each
connector is secured with two Torx screws and has two cables that connect to the system board.
The optical drive connector cables are longer than the hard drive connector cables.
To remove the hard drive or optical drive connector:
1.
Prepare the computer for disassembly (see
2.
Remove the rear cover (see
3.
Remove the VESA panel (see
4.
Remove the system board shield (see
5. Remove two Torx screws that secure the optical drive connector (1) or the hard drive connector
(3) to the computer.
6.
Remove the cables from the metal clips built into the computer.
Preparing to disassemble the computer on page
Rear cover on page 30).
VESA panel on page
System board shield on page
Hard drive and optical drive cables and connectors
55).
56).
27).
71