Front Bezel - HP ProOne 400 G1 Maintenance & Service Manual

Front bezel

The front bezel is located on the front of the computer and is secured to the main system bracket with
seven Torx screws. You can separate the bezel from the computer with most of the computer
assembled. You have to remove the rear cover, webcam, and bottom stand to remove the front bezel
from the computer.
To remove the front bezel:
1.
Prepare the computer for disassembly (see
2. Remove the rear cover (see
3. Remove the webcam (see
4. Remove the bottom stand (see
5. Remove the seven Torx screws that secure the bezel to the main system bracket assembly.
6.
Lift the computer from the bezel.
To install the front bezel, reverse the removal procedures.
50 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Preparing to disassemble the computer on page
Rear cover on page 30).
Webcam module on page
Bottom stand on page
43).
48).
27).