Antenna - HP ProOne 400 G1 Maintenance & Service Manual

Antenna

The antennas route from the WLAN card to the top of the computer.
To remove the antenna:
1. Prepare the computer for disassembly (see
2. Remove the rear cover (see
3. Disconnect the antennas from the WLAN module (1).
4. Remove the antenna cables from the clips built in the computer (2).
5. Peel the main transceiver (3) and the 2nd transceiver (4) to disengage the adhesive that secure
the transceivers to the computer.
To install the antenna, reverse the removal procedures.
Preparing to disassemble the computer on page
Rear cover on page 30).
27).
Antenna
47