HP ProOne 400 G1 Maintenance & Service Manual page 47

4. Slide the hard drive cage left, and then lift it out of the chassis (2).
5. Remove the four mounting screws (1) securing the 2.5-inch drive adapter in the hard drive cage.
Be sure to keep the screws together with the blue rubber grommets to use to install a replacement
drive.
6. Slide the 2.5-inch drive adapter out of the hard drive cage (2).
7. Remove the four screws (1) securing the 2.5-inch drive in the drive adapter. Be sure to keep the
screws to use to install a replacement drive.
Replacing drives
37