Removing A 2.5-Inch Solid State Drive (Ssd), Self-Encrypting Drive (Sed), Or Solid State Hybrid Drive (Sshd) - HP ProOne 400 G1 Maintenance & Service Manual

6. Slide the 3.5-inch hard drive out of the hard drive cage (2).
For instructions on installing a hard drive, see
Removing a 2.5-inch solid state drive (SSD), self-encrypting drive (SED), or solid state hybrid
drive (SSHD)
1.
Prepare the computer for disassembly (see
2.
Remove the rear cover (see
The hard drive cage can now be seen in the lower left side of the chassis.
3. Loosen the captive screw securing the hard drive cage in the chassis (1).
36 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis
Installing a hard drive on page
Preparing to disassemble the computer on page
Rear cover on page 30).
38.
27).