Front Hub; Hub Removal - Polaris RANGER RZR 170 Service Manual

FRONT HUB

Hub Removal

1. Elevate the front end of the vehicle far enough off the
ground to remove the wheel.
CAUTION
Severe injury could occur if machine tips or falls.
2. Loosen and remove the (4) wheel nuts and remove
the black rubber dust boot.
Remove
3. Remove the cotter pin, castle nut and washers.
Nut
Cotter Pin
BODY / SUSPENSION / STEERING
4. Remove the (2) bolts retaining the brake caliper and
5. Remove the hub assembly from the spindle.
Washers
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
remove the caliper from the disc. CAUTION: Do not
hang the caliper by the brake line. Use a strap or
mechanics wire to hang caliper to prevent
damage to the brake line.
5
5.15