Parking Brake Cable Freeplay Adjustment - Polaris RANGER RZR 170 Service Manual

MAINTENANCE

Parking Brake Cable Freeplay Adjustment

Use the in-line adjuster to adjust the parking brake cable
freeplay.
NOTE: Inspect the brake pads before adjusting
parking brake adjuster.
1. Verify the parking brake lever is down.
2. Inspect the freeplay between the cable end and
caliper bracket by pulling back on the cable.
3. Freeplay should be 1/16"-1/8" (1.5-3mm).
4. To adjust the cable freeplay, loosen the in-line adjuster
jam nut. Turn the adjuster nut outwards to decrease
cable freeplay. Turn the adjuster inwards to increase
cable freeplay.
5. After setting the correct amount of freeplay, tighten the
in-line adjuster jam nut against adjuster.
Inspect Freeplay Here
2.34
Inline Adjuster Nut
Jam Nut
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.