Front Gearcase; Gearcase Lubrication - Polaris UTV Series 10 2x4 Owner's Manual

MAINTENANCE AND LUBRICATION

Front Gearcase

Gearcase Lubrication

The front gearcase lubricant level should be checked every six months
or 100 hours, whichever comes first. Front gearcase oil should be
changed annually as outlined in the Periodic Maintenance Schedule.
If the machine is used in wet conditions, the oil should be checked
more frequently.
If the oil has a milky appearance, it should be changed as soon as
possible.
Failure to properly maintain this important area can result in premature
wear or possible failure of the front grease components.
NOTE: We recommend the use of Polaris Premium Hub Oil for
optimum performance.
The front gearcase fill plug (1) is located on the right side of the front
gearcase.
1. With the UTV on a level
surface, remove fill plug and
check the lubricant level.
Lubricant should be kept at
the bottom thread of the fill
plug hole.
2. Support vehicle securely
with a jack stand.
3. Remove the front tire on the
driver's side.
4. Remove fill plug.
5. Remove gearcase drain plug
(2) located on the bottom
right hand side and drain the
oil. Catch and discard used
oil properly.
6. Clean and reinstall the drain plug.
7. Add hub oil to the bottom thread of the fill plug hole.
8. Check for leaks.
66
1
2