Figure 20. Nim/Vim And Dim Installation - ADTRAN NetVanta 7000 Series Hardware Installation Manual

Unit Installation
Step
1 Remove power from the unit.
2 Slide the option module into the option slot until the module is firmly seated against the chassis.
3 Secure the pins at both edges of the module.
4 Connect the cables to the associated device(s).
5 Restore power to the unit.
CF
Your NetVanta 7100 is now ready to be configured and connected to the network. For more information on
configuration for a specific application, refer to the quick configuration documents provided on your
ADTRAN OS System Documentation CD. For details on the command line interface, refer to the Command
Reference Guide (also included on your CD).
All unused NIM/VIM slots on the back panel of the unit must be covered with the supplied
cover plates.
61200796L1-34D
Instructions for Installing the NIMs and VIMs
SLOT 1 NIM/VIM
SLOT 2 NIM/VIM

Figure 20. NIM/VIM and DIM Installation

Copyright © 2006 ADTRAN, Inc.
NetVanta 7000 Series Hardware Installation Guide
Action
MOH
ANALOG
FXS FXO
ETH 0/0
0/1 0/2 0/1 0/2
PAGE
STATIONS TRUNKS
100-250 VAC
50-60Hz
DOOR
CONSOLE
RELAY
NO NC COM
48