Option Modules - ADTRAN NetVanta 7000 Series Hardware Installation Manual

Hide thumbs Also See for NetVanta 7000 Series:
Table of Contents

Advertisement

Option Modules

4.
OPTION MODULES
The NetVanta 7100 supports several option modules designed to meet a variety of networking
requirements. The modules include plug-in network and voice interface modules (NIMs/VIMs) and
plug-on dial backup interface modules (DIMs).
NIMs/VIMs are cards which plug directly into the option module slots (labeled
) located on the rear of the base unit. These cards provide the following types of
SLOT 2 NIM/VIM
interfaces:
DIMs are plug-on cards which plug directly on to the NIM prior to installation into the base unit. A DIM
must be plugged on to a NIM in order for the
be active. The NetVanta 7100 supports the following DIMs:
This section describes each module, providing individual card specifications and features. Refer to
Connector Pin Definitions on page 49 for pinout information. Installing Dial Backup and Network
Interface Modules on page 47 provides information on card installation.
61200796L1-34D
NetVanta 7000 Series Hardware Installation Guide
and
SLOT 1 NIM/VIM
Copyright © 2006 ADTRAN, Inc.
SLOT 1 NIM/VIM
ports on the NIM to
SLOT 2 NIM/VIM
and
24

Advertisement

Table of Contents
loading

Table of Contents