Philco POB 321 User Manual page 16

Setting the end time for cooking
This function enables food to be cooked according to the set end of cooking time.
Place the food you wish to cook inside the oven.
Set the temperature dial and turn the function selection dial to select the appropriate
function.
Repeatedly press the MODE button until "end" appears on the display. The Symbol (A) and
the clock will start fl ashing.
Use the – and + buttons to set the end time for cooking.
After completing the settings the clock and the symbols (A) and
time the oven will start.
The end cooking time can be set in the range of up to 10 hours.
As soon as the cooking time elapses, a warning sound will be made and the (A) symbol will start fl ashing on
the display. Set the temperature dial and function selection dial to zero values and press any button to cancel
the warning signal.
Programmed cooking of food
This function enables food to be cooked at a preset time for a set time.
Place the food you wish to cook inside the oven.
Set the temperature dial and turn the function selection dial to select the appropriate function.
First repeatedly press the MODE button until "stop" appears on the display. The (A) symbol will start fl ashing.
Use the + and – buttons to set the cooking time.
After completing the settings the clock and the symbols (A) and
The cooking time can be set in the range from 0 to 10 hours.
Then repeatedly press the MODE button until "end" appears on the display. The Symbol (A) and the clock will
start fl ashing.
Use the – and + buttons to set the end time for cooking.
After completing the settings the clock and the symbols (A) and
You can set the time, which can be up to 23.59 hours after the gained time or the time added to the
clock.
The oven will start at the time calculated by subtracting the cooking time from the end of cooking time and
so will end the food cooking process at the set end of cooking time. As soon as the cooking time elapses,
a warning sound will be made and the (A) symbol will start fl ashing on the display. Set the temperature dial and
function selection dial to zero values and press any button to cancel the warning signal.
EN - 14
Copyright © 2012, Fast ČR, a. s.
will light up on the display. At the same
will light up on the display.
will light up on the display.
04/2012