Table of Contents
Advertisement
Configuring TCP/IP
Chapter 5: Configuring TCP/IP
Configuring TCP/IP in Windows 2000
Figure 5-1: Windows Control Panel
This section contains two examples of configuring TCP/IP in a Windows environment.
Most computers already have the TCP/IP configuration enabled. Use the following
procedures to verify that the configuration is set up. Configure all client computers on
your network for TCP/IP (the protocol that controls communication among computers).
Two examples are provided in this document:
• Configuring TCP/IP in Windows 2000
• Configuring TCP/IP in Windows XP
NOTE
Follow the instructions in your computer user manual for other Operating
Systems.
1. On the Windows Desktop, click Start.
2. Select Settings and then Control Panel from the pop-up menus to display the
Control Panel window:
3. Double-click the Network and Dial-up Connections icon to display the Network
and Dial-up Connections window:
5
Advertisement
Table of Contents
