REMEHA P 520 Assembly Instructions Manual page 47

64 package RC2 or RC3
Put in place the insulation of the flue gas box and the lower rear insulating material (package RC2 or RC3).
If the side crosspieces overlap at the rear by more than 10 mm, we advise you to saw them off using a hacksaw.
65 package RC2 or RC3
Put in place the 2 rear crosspieces (package RC2 or RC3)behind the
bend of the rear side panels and fasten each crosspiece to the side
panels using 2 screws (Ø 3.94 x 12.7).
47
25/01/2012 - 300016864-001-C P 520