REMEHA P 520 Assembly Instructions Manual page 35

Hide thumbs Also See for P 520:

45 Assembling the fastening brackets of the upper and lower rails

Package RC2 and RC3

Imperative alignment.

Fix the fastening bracket of the upper rails (package RC2 or RC3) on the upper lug

lower rail support brackets).

Fit the bracket onto the stub

Fasten with 1 screw H10 x 50 and serrated washers and H10 nuts

Assemble 1 "Rapid" nut on the top of the bracket

25/01/2012 - 300016864-001-C

with the tapped shaft on the inside.

Front

see fig. 46

Fasten the lower rail with H8 x 30 screws and L8 washers.

The other rail support brackets are fastened opposite the holes

provided on the lower rail.

Length required while assembling the 2-piece rails (boilers

with 19 to 25 sections), see fig. 47.

(these brackets must be vertically aligned with the

P 520

Table of Contents