Advertisement
49 Assembling the furnace door and lower crosspiece panels
package RC2 or RC3
50 Assembling the control panel bracket (all control panels)
package RC2 or RC3
Fit the 4 "Rapid" nuts on the front of the cable channels.
Fit the "Rapid" nuts in the slots
4 "Rapid" nuts for 13 to 17 sections.
8 "Rapid" nuts for 19 to 25 sections.
Fix the control panel bracket (package RC2 or RC3) underneath the 2 cable channels by means of 2 screws (H8 x 16) and 2 serrated
washers.
25/01/2012 - 300016864-001-C
:
Put the furnace door panel in place (package RC2 or RC3) and
fasten with 2 tapping screws (Ø 3.94 x 12.7). The furnace door panel
may be cut in 2 at the micro-joints.
Fix the casing support lower crosspiece (package RC2 or RC3)
by means of 2 screws (H6 x 20) and 2 serrated washers.
P 520
39
Advertisement
