Advertisement
20 Assembling the sweeping covers
Rear
Front
- Clean off the protective varnish on the ground surfaces with
diluent.
Cover model
Boiler type
P 520-13
P 520-15
P 520-17
P 520-19
P 520-21
P 520-23
P 520-25
20
No. 1
No. 2
Number of sweeping covers per type
Front
2
4
2
4
2
6
2
6
2
8
2
6
2
10
- The covers are numbered from 1 to 4, and must be fitted with a
thermocord
. The length of the thermocord depends upon the
cover and is given below.
Type
Thermocord length
1
1335 mm
2
1110 mm
3
890 mm
4
665 mm
Place the 2 no. 1 sweeping covers (with the handles turned outward
) on either side of the boiler starting from the front. Distribute the
other covers evenly.
Each cover is fitted with a system whereby it can only be
mounted with the handles turned outward.
- Fit the two locks of each cover between the sections.
- Push the cover towards the outside of the boiler, to the closed
position
.
- Fasten the two brass nuts of each cover
No. 3
4
P 520
.
No. 4
Rear
2
2
25/01/2012 - 300016864-001-C
Advertisement
