Advertisement
8
Fill the bottom of the W groove opposite the U groove for the intermediary parts (located on the periphery of the section) with a continuous
bead of DOW CORNING silicon, diameter approximately Ø 5 mm.
9
Place the first normal intermediate section, making sure that it is turned in the right direction, i.e. with the flattening groove against the
thermocord.
For safety, insert a lateral assembly rod (supplied) in the holes of the 2 sections.
Push the section gently and simultaneously on the 2 nipples of the rear section with a hammer and a piece of wood positioned in line with
the bores.
10
Rear section
Intermediate section
P 520
25/01/2012 - 300016864-001-C
Advertisement
