Advertisement
41 Assembling the cable channels - 19 to 25 sections
Package FA16 and Package FA18, FA20, FA22, FA24
Number of sections
Length (mm)
Place the cable channels so that their bevelled end is to the front.
Fasten with 2 screws H8 x 16 + L8 washers in the third hole starting from the front and opposite the special nut.
Fasten them to the intermediate piece and the rear crosspieces with 2 screws H8 x 16 and L8 washers.
Align the 2 additional cable channels with the two others.
Fasten them to the intermediate piece and the rear crosspieces with 4 screws (H8 x 16) and L8 washers.
42 Assembling the casing positioning brackets
package RC2 or RC3
Fasten the positioning brackets (package RC2 or RC3) onto the right and left-hand upper bosses of the front section with: 2 screws H8 x
16 + 2 serrated washers (13 mm spanner).
32
19
21
2600
2910
Package FA16
Package FA18, FA20, FA22, FA24
23
25
3110
3310
P 520
25/01/2012 - 300016864-001-C
Advertisement
