Table of Contents
Advertisement
DVR Basics
Front Panel
1
1. ON/OFF Alternates between ON and STANDBY modes.
2. SIGNAL LED Green indicates a good satellite signal. Red
indicates no signal.
3. REMOTE LED Flashes to acknowledge a command from the
remote control.
4. CLOCK Indicates the current time or channel number.
5. MAIL LED Indicates an unread message in the mailbox.
6. TIMER LED A steady light indicates a timer is set. A flashing
light indicates the DVR is tuned to a timer program or within two
minutes of a timer program.
8
2
3 4
5 6
7 8
9
10
7. GO BACK To return to a previous menu or the last channel
viewed.
8. OPTIONS To display the Main Menu.
9. NAVIGATION To navigate within menus or change channels
up and down.
10. SELECT To select a highlighted menu option.
11. HDTV MODE SELECT Toggles between 1080i, 720p, 480p,
480i and Native modes and is shown on the LED display.
12. RIGHT/LEFT AUDIO and COMPOSITE VIDEO INPUTS
11
12
Advertisement
Table of Contents
