Remote Control - Motorola DVR530 User Manual

Motorola user guide digital video recorder dvr530
Table of Contents

Advertisement

Remote Control

1
2
3
4
5
6
7
8
9
10
11
12
13
14
The remote control provided with your DVR may be used to operate and access all features of your DVR.
Additionally, the remote control may also be used to operate your TV, DVD, VCR,
A/V receiver, and other home theater components.
15
The remote control utilizes two AA batteries which were provided with your equipment packaging. To add
batteries to the remote control, remove the cover on the center back of the remote control by pressing down
the latch and pulling outward. Position each battery in the compartment so that the flat base of the battery (-
) is against the spring and the raised contact of the battery (+) is against the flat terminal. Make sure the
batteries are securely seated and replace the panel.
16
The remote contol will operate the DVR while in the SAT mode. TV, DVD, and other modes may need to be
programmed (see page 20) before the remote control will operate your specific home theater components.
17
1. Power.
18
2. Mode keys (SAT, TV, VCR, AUX). Press once to set
the mode of the remote control functions. Press and
19
hold to program the mode for specific component
models.
3. Interactive. Displays Interactive menus.
4. Go Back. To return to the previous menu.
5. Navigation Keys. To navigate within menus or
20
change channel up and down.
6. Guide. To display the Interactive Program Guide.
7. DVR/DVD/VCR Keys. Press to rewind, play, fast-
21
forward, skip back, skip ahead, record, pause or
22
stop your DVR, DVD or VCR functions.
8. Mute. To mute the TV sound.
23
9. Vol (+ and -). To raise or lower the volume level.
24
10. Interests. To display the Interests menu.
25
11. Favourites. Changes the channel using only your
favourite (pre-selected) channels.
12. Locks. Displays the parental controls menu.
13. Number Keys. Enter the three-digit channel
number, or the number followed by "Enter" for
channels below 100.
14. Help. To display the main help screen menu.
15. Source. To control the input source to your
components.
16. DVR List. To view a list of recorded programs.
17. Exit. To exit all menus or to view the current
channel, program title, and time.
18. Enter. Press ENTER to select a highlighted menu
option, or press ENTER to tune in the channel whose
numbers you have already pressed.
19. Info. To display detailed information about the
current program or a highlighted program in the Guide.
20. Ch (+ and -). To channel up or down. These
keys also function as page (screen) up and down
when you are viewing the guide.
21. Last Ch. To return to the last channel viewed.
22. PPV. To display the current Pay-Per-View pro-
grams.
23. Browse. To display the current program title at the
bottom of the screen, and activate the browser to
preview program title on other channels or at a later
time.
24. Options. To display the Main Menu.
25. Interactive. Press to make Interactive selections.
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvr530 hd series

Table of Contents