Machine Operation; Safety Device - SunStar SC 7900-Series User Manual

SC 7900 Series is designed for applying sewing to knitwear and other similar materials.
Read thoroughly the following instructions.
Read thoroughly and fully understand the manual before operating the machine.
Dress for safety.
Keep your hands or head away from the moving parts of the machine such as needle,
looper, spreader, take-up lever, and pulley when the machine is in operation.
Do not remove the safety valve and all kinds of covers when the machine is in operation.
Be sure to connect the ground wire
Be sure the main power is turned off and the power switch is set to OFF before opening
the cover of any electrical component or control box.
Turn the machine off when threading needles or inspecting the finished sewing.
Do not press the pedals when you turn on the power.
Install the machine away from strong electromagnetic wave such as high frequency
welder as far as possible.
[WARNING]
When you operate machine, you should put the cover on to prevent physical injury by the
gear or other parts. Turn off the power before inspecting or adjusting.
Safety Label: Note directions for sewing machine use
Thread take-up Cover: Device to prevent finger to come in contact with the thread take-
up.
Base cover: Device to prevent accidents during rotation of motor.
Motor cover: Device to prevent accidents during rotation of motor.
7