Safety Rules; Machine Delivery; Machine Installation; Machine Repair - SunStar SC 7900-Series User Manual

Speed overlock direct drive, 4-needle flat seamer feed off the amp type
Hide thumbs Also See for SC 7900-Series:
Table of Contents

Advertisement

SAFETY RULES

The following set of safety rules categorized as Danger, Warning and Caution indicates possibilities of physical or property
damages if not fully observed.
D A N G E R : These safety instructions must be observed to be safe from danger when installing, delivering, or
maintaining the machine.
WARNING : These safety instructions must be observed to be safe from machine injuries.
CAUTION : These safety instructions must be observed to prevent machine errors.

1) Machine Delivery

2) Machine Installation

3) Machine Repair

6
Only qualified technicians who are familiar with the safety instructions should carry the
machine. Make sure to fully observe the following instructions when carrying the machine.
The machine should be carried out by two or more people.
Clean oil spots to prevent accidents when delivering.
Installation environment may incur machine malfunction or breakdown. Make sure to meet
the following conditions.
Undo a package from the top in order. Beware nails in wooden box.
Dust and humidity can cause pollution and corrosion of the machine. Air conditioner
should be equipped and cleaned regularly.
Do not expose the machine directly to the sun.
Allow at least 50cm of space on each side of the machine for convenient maintenance.
Explosion hazard
Do not operate machine in explosive atmospheres, where aerosol spray is used in large
quantity or oxygen is controlled.
The lighting is not offered because of the nature of the machine, the lighting should be
install in the workspace by users.
[Reference] details of the machine installation are illustrated in 4. INSTALLAION.
Only SUNSTAR MACHINERY Co.,Ltd-trained and selected repair engineers should go
repair work.
Turn off the power before cleaning or repairing the machine. Wait for 4 minutes so the
machine electricity is completely discharged.
Do not change the specifications or any parts on the machine without confirmation from
SUNSTAR MACHINERY Co.,Ltd. Such change may cause safety accidents.
Use only SUNSTAR MACHINERY Co.,Ltd parts when repairing machine.
Put all safety cover on after repairing.

Advertisement

Table of Contents
loading

Table of Contents