Table of Contents
Advertisement
5) AIR-COMPRESSED PRESSURE BAR LIFTER
INSTALLATION
An air-compressed pressure bar lifter is composed of several
parts.
Assemble an air-compressed cylinder and an assembled
device with cylinder knuckles to the cylinder linking plate.
Assemble the cylinder linking plate with the arm support.
Adjust the cylinder knuckle to make the distance of 1mm
between the cylinder knuckle short screw and the knee lifter
connection lever. (Refer to the figure 9)
(1) Knee lifter connection leve
Assemble the knee lifter connection lever
screw .
with the
15
Advertisement
Table of Contents
