Air-Compressed Device Installation - SunStar SC 7900-Series User Manual

Speed overlock direct drive, 4-needle flat seamer feed off the amp type

Hide thumbs Also See for SC 7900-Series:

Table of Contents

8) AIR-COMPRESSED DEVICE INSTALLATION

(1) Specification

Connect the air hose

Connect the cable

which is written in PF linking to the control box to the upper solenoid valve.

Connect the cable

which is written in CL linking to the control box to the lower solenoid valve.

After installing to the table, open the air-compressed regulator

0.4~0.5 bar.

to the manifolder block of the filter regulator and solenoid valve.

to the upper fitting of the air-compressed cylinder and the left side of the upper solenoid valve.

to the lower fitting of the air-compressed cylinder and the right side of the upper solenoid valve.

to the suction pipe and the lower solenoid valve.

of the filter regulator and set the compressed air at the

Table of Contents