Golden Technologies Buzzaround XL GB146 Service Manual page 39

Replace harness/es as necessary.
Damaged?
Inspect the connection between the
front intermediate motor harness
(8a) and the rear intermediate motor
harness (9a). Make sure the contacts
are not corroded or damaged.
Check the pins on the
motor/brake assembly harness
connector 11a. Make sure they are
seated properly.
Separate the front
frame from the
drivetrain.
OK?
Check the front intermediate motor
harness and the rear intermediate
10 ohms or less?
motor harness for continuity.
80 ohms or less but not shorted?
Replace the
drivetrain assembly.
Replace as necessary.
Measure resistance across pin 1
and pin 2 (small black wires) on
the motor/brake assembly harness
(11a) with park engaged.
Buzzaround XL_SG_REVA_100711
Open?
Shorted or open?
Replace the
park brake.
38