SiBE12-816_D
1.7
Removal of Four Way Valve / Electronic Expansion
Valves
Procedure
Step
1. Remove the peripheries.
1
Remove the screw and
remove the four way
valve coil.
Pull out the electronic
2
expansion valve coils.
3
Remove the putty.
4
Remove the terminal
cover.
Removal Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Terminal cover
Preparation
Remove the sound blankets.
(R7644)
Detach the four way valve
coil and the clamp, and then
detach the wire harnesses.
(R7645)
(R7646)
(R7637)
Outdoor Unit
Points
(R7703)
292