Daikin 2MKS40G2V1B Service Manual page 45

SiBE12-816_D
1.1.2 FTXG25/35JV1BW(S), CTXG50JV1BW(S)
Connectors and PCB (1): Control PCB
Other Parts
1) S21
2) S25
3) S32
4) S41
5) S42
6) S46
7) S200
8) H1, H2, H3,
9) JB
10) LED A
11) F1U
12) V1
PCB (2): Signal Receiver / Display PCB
1) S51
2) S52
3) S1W
4) H1P
5) H2P
6) JA
PCB (3): INTELLIGENT EYE Sensor PCB
1) S36
Printed Circuit Board Connector Wiring Diagram
Connector for centralized control (HA)
Connector for INTELLIGENT EYE sensor PCB
Indoor heat exchanger thermistor
Connector for swing motors
Connector for reduction motor (front panel mechanism) and limit switch
Connector for signal receiver / display PCB
Connector for fan motor
Connector for terminal board
FG
Fan speed setting when compressor stops for thermostat OFF
JC Power failure recovery function (auto-restart)
∗
Refer to page 306 for detail.
LED for service monitor (green)
Fuse (3.15 A, 250 V)
Varistor
Connector for control PCB
Connector for room temperature thermistor
Forced operation ON/OFF button
LED for operation (multi-color)
LED for INTELLIGENT EYE (green)
Address setting jumper
∗
Refer to page 303 for detail.
Connector for control PCB
Indoor Unit
34