Inverter Powerful Operation - Daikin 2MKS40G2V1B Service Manual

Function of Indoor Unit (RA Models)

1.14 Inverter POWERFUL Operation

Outline In order to exploit the cooling and heating capacity to full extent, operate the air conditioner by
increasing the indoor fan rotating speed and the compressor frequency.
Detail When POWERFUL button is pressed, the fan speed and target temperature are converted to
the following states for 20 minutes.
Operation mode
COOL
DRY
HEAT
FAN
AUTO
A
Ex.) : POWERFUL operation in cooling mode.
Target temp.
POWERFUL ON
POWERFUL OFF
1.14.1 Multi-Colored Indicator Lamp / TIMER Lamp
Features Wall Mounted Type: FTXG-J, CTXG-J Series
Current operation mode is displayed in color of the lamp of the indoor unit. Operating status can
be monitored even in automatic operation in accordance with the mode of actual operation.
The lamp color changes according to the operation.
69
Dry rotating speed +
Same as cooling /
heating in POWERFUL
= 40 ~ 50 rpm (depending on the model)
It should be the lower limit of cooling temperature.
18˚C
Fan
A rpm
H tap
Set tap
∗
AUTO ........................................................Red / Blue
∗
DRY ..........................................................Green
∗
COOL........................................................Blue
∗
HEAT ........................................................Red
∗
FAN...........................................................White
∗
TIMER.......................................................Orange
Fan speed Target temperature
H tap + A rpm
Lowered by 2 ~ 2.5°C
A rpm
H tap + A rpm
H tap + A rpm
The target temperature is
kept unchanged.
operation
20 minutes
Multi-colored indicator lamp /
TIMER lamp
18°C
30 ~ 32°C
—
It counts 20 min. also in the remote controller.
Ending condition: "or" in 1 to 3
1. After the lapse of 20 minutes.
2. Operation OFF
3. POWERFUL operation is OFF.
(R11815)
Function and Control
SiBE12-816_D
(R14061)