Table of Contents
Advertisement
Aileron Servo Installation
1. The ailerons have been pre-hinged and glued to
the wing panels and are ready for flight. No
other steps are necessary for hinging.
Gather one wing panel, one aileron servo, and
one 6" servo extension as shown below for servo
installation.
2. Layout the servo on the wing to test fit the in-
stallation and ensure servo lead is the correct
length.
Note: 180 in. oz. digital, metal geared servos are
recommended. Servo selection can be the difference
between a great flying model and a model that will
crash. Always use brand name high quality servos.
WING ASSEMBLY
3. Attach the 6" extension to the servo lead and
secure with safety wire, string, tape, or other
method. Ensure the plugs will not come apart
from vibration or light tension.
4. Fasten the pull string from the servo hole to the
male plug of the servo extension.
10
Safety Clips
Available
from
Aeroworks
Hide quick links:
Advertisement
Table of Contents
